OUR SERVICES
Dynamic friction coefficient measurement
We will measure the slip resistance of your surface according to the guidelines of the Institute of Building Technology. Then you will receive a Certificate of Conformity of the conducted test.
How do we measure a floor's slip resistance?
We have the most modern and accurate measuring equipment. After the tests, we provide a report and an anti-slip certificate confirming compliance with the guidelines of the Building Research Institute.
- On the laid floor
- Under laboratory conditions, after submitting a sample
Why is it necessary to check the condition of flooring for slip resistance?
Every ceramic tile, over time and with the intensity of use, loses its factory slip resistance. Therefore, the slip resistance of floors should be checked periodically (at least once every 3 years), as part of technical inspections of facilities.
For more on the reasons why you should test the slip resistance of surfaces, click on the button below.
Who contracts us to measure the slip resistance of floors?
Designers, building inspectors, investors, managers, administrators of public facilities or residential buildings, wanting to ensure that their floors are safe and in compliance with applicable laws, guidelines and guides, regularly test the slip resistance, of new and in-service floors.
What PTV slip resistance values are correct?
PTV slip resistance values form the basis for classifying floors in terms of slip risk. This classification is shown in the table below.
| Slip resistance (PTV) | classification |
|---|---|
| 0 – 24 | High risk of slipping |
| 25 - 35 | Medium slip risk |
| ≥ 36 | Low slip risk |
If you want to learn more about the requirements and guidelines for slip resistance and surface safety, click
here.How do we work?
We always perform measurements according to the guidelines in the standard and the dedicated slides (feet) for these measurements, on dry and wet.
After each test, we will prepare a report on the skid resistance of the substrate.
A reliable test is the basis for recognizing the compliance of the parameters of the tested substrate with the guidelines developed by the Building Research Institute in Warsaw in 2018 and the Ministry of Investment and Development in 2020.
What is worth keeping in mind before deciding on a professional skid resistance measurement?
Tap on the tabs below to find out
more.It is worth remembering that when ordering a slip measurement service for your floor, always look for an experienced company with an established track record.
The company should have suitable and calibrated
measurement devicesguaranteeing
reliable measurement, conforming to the applicable standards.
If you want a professionally conducted service and top-level advice on safety, anti-slip, waterproofing or cleaning
contact us.Remember that the obligation to measure the coefficient of friction requires from certain acts. You will read more about it here:
What our customers are
saying about us
Customer feedback is the most important to us.
Customer feedback is the most important to us.
Do you see the way to collaboration?
Let's talk!
Leave us a contact request and we will try to respond within 24 hours or
send us a message.